M&P USA GM MagneRide Ride Height Sensor Simulator 4-Pack, Z95 2015-2023

$139.99 & Free Shipping

Plug-and-play ride height simulator 4-pack for both axles of 2015-2020 (Z95) and 2021-2023 Cadillac Escalade, Chevy Tahoe and Suburban, GMC Yukon Denali, and 2015-2018 GMC Sierra 1500 Denali. One axle only? Order the 2-pack. Replacing the shocks too? Get our 2015-2020 2-Axle Kit. 2005-2014 models take our 2005-2014 ride height 4-pack.

In stock, ready to ship

Free US shipping on every order!

  • 30-day hassle-free returns
  • Lifetime warranty
  • Secure payments
Designed, built, and supported in the USA
Veteran-owned business, since 2012

See it in 20 seconds

A quick look at what it fixes, how to check your fit and how it installs. Tap play when you are ready.

M&P USA  |  Made in the USA  |  Veteran owned

2015-2023 ride height simulator 4-pack

4 plug-and-play 3-pin ride height simulators for both axles (front and rear) of 2015-2020 (Z95) and 2021-2023 Cadillac Escalade, Chevrolet Tahoe and Suburban, GMC Yukon Denali, and 2015-2018 Sierra 1500 Denali. 2005-2014 models take our 2005-2014 ride height 4-pack, even with a Z95 label.

✓ Lifetime warranty✓ 30-day returns✓ US-based support

The M&P USA 2015-2023 ride height simulator 4-pack gives you 4 plug-and-play 3-pin ride height simulators for both axles (front and rear), on their own, without shock simulators. They plug into the factory ride height sensor connectors with no cutting or splicing and keep the suspension module reading a normal ride height, so it doesn’t set fault codes or the “Service Suspension System” warning. Replacing the shocks too? Our 2015-2020 Kit, our most popular MagneRide bypass, includes both.

The same simulators fit 2015-2020 (Z95) and 2021-2023 GM MagneRide trucks and SUVs, so this pack covers both. Made in the USA by a certified veteran-owned company and backed by our lifetime warranty.

The short answer

Use this 2015-2023 ride height simulator 4-pack if you need only the ride height simulators for both axles (front and rear) on a Z95 or 2021-2023 GM truck or SUV (see the fitment table below).

Get a complete kit instead if you are also removing the MagneRide shocks

Not sure? Use our Find My Kit tool or send us your year, make, and model and we’ll confirm the right part before you order.

Before you buy parts, enter your VIN in the NHTSA recall lookup to check for open safety recalls; recall repairs are free at a dealer.

Rear air ride? Read this first

The rear ride height sensors control Automatic Level Control. To keep auto leveling working with rear air shocks, leave the rear ride height sensors connected. 2021 and newer SUVs with F47 Air Ride Adaptive Suspension (air at all four corners) are not covered. Contact us if you’re not sure.

Check your plugs

Pick by model year and plugs, not the label. 2015-2023 models with the newer-style 3-pin ride height plug take this pack. 2005-2014 models have the older-style plugs and take our 2005-2014 ride height 4-pack, even when the glove box label says Z95. 2021-2023 SUVs also show Z95 on the label, and this pack fits them too. Plugs don’t match? Send us a message before you order.

Check your plugs: the newer-style 3-pin ride height plug takes the 2015-2023 ride height simulator 4-pack
The newer-style 3-pin ride height plug (right column) takes this pack.

What’s included

M&P USA Z95 ride height simulator 4-pack for GM MagneRide trucks and SUVs, also fits 2021-2023
The 2015-2023 ride height simulator 4-pack: 4 simulators for both axles (front and rear).
  • 4 ride height sensor simulators with the 3-pin factory connector: keep each ride height sensor circuit reading normally so the suspension module does not set fault codes.
  • Zip ties for mounting, plus printed installation instructions.

Specifications

Item Detail
Product 2015-2023 ride height simulator 4-pack (MPUSA-RH95-4PK)
Fits 2015-2020 (Z95) and 2021-2023 MagneRide (no F47); 2005-2014 models: use the 2005-2014 packs
Coverage Both axles (front and rear)
Pieces 4 ride height sensor simulators
Connector 3-pin factory plug
Installation Plug and play, no cutting or splicing
Shock simulators Not included (see our complete kits)
After installation Ride Height Trim Procedure with a scan tool (required on GMC Denali)
Warranty Lifetime
Returns 30 days
Made in USA

2015-2023 ride height simulator 4-pack fitment

Plug and play for these 2015-2023 vehicles with factory MagneRide and the newer-style plugs. 2005-2014 models take our 2005-2014 ride height 4-pack, even with a Z95 label.

Years Make Model Glove box label
2015-2020 Cadillac Escalade, Escalade ESV Z95
2015-2020 Chevrolet Suburban LTZ (2015-2016), Premier (2017-2020), RST 6.2L Performance Package Z95
2015-2020 Chevrolet Tahoe LTZ (2015-2016), Premier (2017-2020), RST 6.2L Performance Package Z95
2015-2020 GMC Yukon Denali, Yukon Denali XL Z95
2015-2018 GMC Sierra 1500 Denali Z95
2021-2023 Cadillac Escalade, Escalade ESV (with MagneRide, no Air Ride) Z95, no F47
2021-2023 Chevrolet Tahoe, Suburban (with MagneRide, no Air Ride) Z95, no F47
2021-2023 GMC Yukon, Yukon XL AT4 and Denali (no Air Ride) Z95, no F47

Not for 2019 and newer Silverado or Sierra pickups, or SUVs with F47 Air Ride Adaptive Suspension. Vehicle not listed? Contact us to confirm before ordering.

How to install the 2015-2023 ride height simulator 4-pack

  1. 1Plug in the simulators. With the vehicle off and safely raised, release the locking tab on each factory ride height sensor connector, unplug it, and plug in a 3-pin ride height simulator until it clicks.
  2. 2Cycle the power. Turn the vehicle on for 30 seconds, then off, so the suspension module reads the new ride height.
  3. 3Secure them. Zip-tie each simulator through its mounting hole to a metal surface, away from the exhaust, and not against plastic wire loom or wiring.
  4. 4Lower the vehicle, clear codes, and trim. With all four wheels on the ground, start the vehicle. Suspension codes clear within up to 40 ignition cycles, with a scan tool, or by disconnecting the battery for at least 30 minutes. Then perform a Ride Height Trim Procedure with a scan tool: required on GMC Denali models and recommended on all other vehicles.

Printed instructions come with every 2015-2023 ride height simulator 4-pack. Questions during installation? Contact us.

Why M&P USA

  • Built to last: every 2015-2023 ride height simulator 4-pack uses sealed, weatherproof OEM-style connections, not crimp connections that corrode over time.
  • Lifetime warranty: if a part ever fails, we replace it at no charge.
  • Made and supported in the USA by a certified veteran-owned business. Questions go to a real person through live chat or our contact form.
  • 30-day returns: see our Return & Refund Policy.

Frequently asked questions

Does the 2015-2023 ride height simulator 4-pack fit 2021-2023 SUVs too?

Yes. The 2021-2023 ride height simulators are exactly the same as the Z95 ones. The 2021-2023 shock connectors are different, so for a full 2021-2023 conversion use our 2021-2023 Kit or 2021-2023 2-Axle Kit.

How many do I need?

One simulator per corner. Two cover one axle; four cover both axles. The 2015-2023 ride height simulator 4-pack covers both axles (front and rear).

Does this include shock simulators?

No, ride height simulators only. If you’re also removing the MagneRide shocks, get a complete 2015-2020 Kit or 2021-2023 Kit, which include both.

Why do trucks and SUVs need ride height simulators?

GM MagneRide trucks and SUVs monitor ride height sensors along with the shocks. Without the simulators, the suspension module sets fault codes and the “Service Suspension System” warning stays on.

Do they work with lift, leveling, or lowering kits?

Yes. The 2015-2023 ride height simulator 4-pack sends the module a steady, normal ride height reading, so the height change does not set suspension codes.

Will auto leveling still work with rear air ride?

To keep Automatic Level Control working with rear air shocks, leave the rear ride height sensors connected. Contact us if you’re not sure.

My 2009-2014 Escalade label says Z95. Which pack?

Our 2005-2014 ride height 4-pack. 2005-2014 models have the older-style plugs, so they take the 2005-2014 packs even when the label says Z95. Or send us your VIN and we’ll confirm.

Do they fit my 2005-2014 truck or SUV?

No. 2005-2014 vehicles use different plugs; see our 2005-2014 ride height 4-pack or 2005-2014 Kit.

Still not sure this is the right part?

Use Find My Kit, read the Z95 guide, or send us your VIN and a real person will confirm the right part before you order.

Find My KitZ95 guideContact us

MagneRide® is a registered trademark of BWI Group. Other names are used only to identify compatible vehicles. M&P USA is not affiliated with, endorsed by, or sponsored by BWI Group or General Motors. Factory part prices and repair costs mentioned are estimates.

Weight 6 oz
Dimensions 4 × 6 × 1 in
Reviews from our customers on Amazon and our website.

Reviews

There are no reviews yet.

Be the first to review “M&P USA GM MagneRide Ride Height Sensor Simulator 4-Pack, Z95 2015-2023”

Your email address will not be published.

Rate Your Satisfaction*

ReviewX

E.g.: https://www.youtube.com/watch?v=HhBUmxEOfpc

You may also like…

Shopping Cart